|
Written by Lefteris Zacharia
|
|
Tuesday, 03 July 2007 |
|
REGULAR extinguishers contain a siliconized sodium bicarbonate based dry chemical with free flowing and non-caking additives. Economical Class B & C protection with lower initial cost and recharging. This chemical smothers fires in flammable liquids and pressurized gases and will not conduct electricity back to the operator. Available in Wheeled and Stationary extinguishers  |
|
Last Updated ( Tuesday, 03 July 2007 )
|
|
Read more...
|
|
|
Written by Lefteris Zacharia
|
|
Tuesday, 03 July 2007 |
|
Carbon Dioxide is discharged as a white cloud of "snow" which smothers a fire by eliminating oxygen. It is effective for Class B flammable liquids and is electrically non-conductive. Carbon Dioxide is a clean, non-contaminating, odorless gas. Also available in 50 / 100 lb. wheeled extinguishers and 100 lb. stationary. |
|
Last Updated ( Tuesday, 03 July 2007 )
|
|
Read more...
|
|
|
Written by Lefteris Zacharia
|
|
Tuesday, 03 July 2007 |
|
HALOTRON I is a “Clean Agent” HydroChloroFluoroCarbon (HCFC) discharged as a rapidly evaporating liquid which leaves no residue. It effectively extinguishes Class A and B fires by cooling and smothering and it will not conduct electricity back to the operator. Halotron is pressurized with Argon gas and is an EPA and FAA approved agent suitable for use on Class A, B and C fires. It has a low GWP of 0.04 - 0.24, low ODP of 0.014 (twelve times lower than the EPA maximum allowable ODP of 0.20) and a low Atmospheric Lifetime (3½ to 11 years). Halotron is intended for use in areas formerly protected by Halon 1211 hand portable extinguishers such as computer rooms, telecommunications facilities, clean rooms, data storage areas, offices (for protection of sensitive electronic equipment), boats and vehicles. |
|
Last Updated ( Friday, 01 February 2008 )
|
|
Read more...
|
|
|
High Performance Dry Chemical |
|
|
|
|
Written by Lefteris Zacharia
|
|
Tuesday, 03 July 2007 |
|
HIGH PERFORMANCE extinguishers are the ultimate choice in fire extinguishers for high hazard, frequent use and extreme environment applications. Economical - less initial cost, lower maintenance costs and greater reliability than cartridge operated extinguishers Available in 125 and 250 lb. Wheeled and Stationary extinguishers. Hot dip galvanized USCG brackets available  |
|
Last Updated ( Tuesday, 03 July 2007 )
|
|
Read more...
|
|
|
Written by Lefteris Zacharia
|
|
Tuesday, 03 July 2007 |
|
Model 240 utilizes the cooling, soaking and penetrating effect of a 45-55 ft. stream of WATER. The 50 sec. discharge time makes it very effective for inexperienced operators for use on Class A fires. Protect from freezing by adding the Model 506 Loaded Stream/Anti-freeze charge. In areas with a high level chloride content water it may be corrosion protected by using the Model 507 charge. Model 254 AFFF FOAM unique 6 liter size fills many requirements for a lighter, more compact Class A:B extinguisher. Easy and effective application with the patented spray nozzle. Apply to Class B liquid spills to prevent ignition. Ideal for emergency first response vehicles. Model 252 FFFP FOAM adds Class B fire fighting capability to the Class A effectiveness of this extinguisher. The Alcohol Resistant fire fighting agent is effective on fires in a wide variety of Class B materials such as alcohols, polar solvents, hydrocarbons and combinations such as gasohol. Apply to a non-ignited Class B liquid spill and it will seal the surface minimizing the chance of serious fire. Model 250 AFFF FOAM Class A:B extinguisher. Easy and effective application with air aspirated nozzle. Apply to Class B liquid spills to prevent ignition. Ideal for emergency first response vehicles.  |
|
Last Updated ( Tuesday, 03 July 2007 )
|
|
Read more...
|
|
|
|